Mix Conditioner WPM-100WB
**AVAILABLE IN 5.0 GALLON PAILS ONLY!
WPM100 is a ready-to-use, high performance pre-additive for concrete.
**AVAILABLE IN 5.0 GALLON PAILS ONLY!
WPM100 is a ready-to-use, high performance pre-additive for concrete.
**AVAILABLE IN 5.0 GALLON PAILS ONLY!
WPM100 is a ready-to-use, high performance pre-additive for concrete.
The unique chemistry of our Mix Conditioner surrounds cement particles further hydrating them to create more cement binder. This produces a denser, stronger concrete while virtually eliminating bleed water saving time and money. WPM100 also reduces plastic shrinkage cracks due to the decrease in volume of evaporated water lost.
WPM100 is a pre-additive which is added to the water at the batch plant before the cement, aggregate, and admixtures are added. It creates a gel that controls segregation and stratification of aggregate, and virtually eliminates all bleed water. It hydrates the lime much more completely and provides a more impermeable and durable high performance concrete.
-
• High performance concrete at a minimal cost
• Increases hydration of cement particles
• Improved microstructure with no segregation
• Controls bleed water
• Ease of placement and faster finishing
• Improves concrete pumping
• Less plastic shrinkage, cracking, curling
• Improved durability
• Greater density and compressive strength with less permeability
• Increased flexural and tensile strength
• Reduced efflorescence
• Promotes chemical and mechanical bonding to steel
• Improves rebar protection
• Higher acid/chemical resistance
• Superior freeze/thaw resistance
-
No bleeding
No bleed channels
Improves hydration
Improves micro-structure
Denser concrete
Less cracking
Less plastic shrinkage, curling
Lower moisture in slabs
Lower permeability
More finish-able surface
Less efflorescence
-
WPM-100 Is a pre-additive which is added to the water at the batch plant before the cement, aggregate, and admixtures.
-
Five Gallon Pails ONLY
This product is compliant with the following national, state, and district AIM VOC regulations, US environmental Protection Agency, California Air Resources Board SCM Districts, South Coast Air Quality Management Districts, Maricopa County AZ, and Northeast Ozone Transport Commission.
