Best Choice Cleaner WPC-750WB
**MUST USE WPN-100 ACID NEUTRALIZER WITH APPLICATION**
Fast acting, concentrated, biodegradable, cleaner and descaler. Formulated for cleaning and removing difficult stains from concrete, limestone, and various hard surfaces. Also removes cement, grout haze and mortar residue from most surfaces including natural stone.
**MUST USE WPN-100 ACID NEUTRALIZER WITH APPLICATION**
Fast acting, concentrated, biodegradable, cleaner and descaler. Formulated for cleaning and removing difficult stains from concrete, limestone, and various hard surfaces. Also removes cement, grout haze and mortar residue from most surfaces including natural stone.
**MUST USE WPN-100 ACID NEUTRALIZER WITH APPLICATION**
Fast acting, concentrated, biodegradable, cleaner and descaler. Formulated for cleaning and removing difficult stains from concrete, limestone, and various hard surfaces. Also removes cement, grout haze and mortar residue from most surfaces including natural stone.
**USE WITH WPN-100 ACID NEUTRALIZER TO STOP REACTIVITY**
WPC-750 Best Choice Cleaner is an easy to use, fast acting, highly effective, concentrated de-scaler/cleaner for use on concrete, limestone, and calcium-based substrates. It is a conservative, less volatile, more forgiving alternative to acid-base cleaners for concrete, tile, grout, and natural stone surfaces. It will remove rust deposits, lime deposits, hard water deposits, efflorescence, oil stains, common black and green algae, red clay stains, common dirt and grime stains and household food and liquid stains. WPC-750 will penetrate below surface and lift dirt and soil from Cementous and limestone substrates.
WPC-750 will also remove cement, grout haze, mortar residue and joint cement, and other cement-based deposits from most surfaces including natural stone. It is suitable for interior and exterior use.
-
Biodegradable
Fast Acting
Corrosion Inhibitors
Safe, Non-Toxic Formula
Deep Penetrating
Powerful Detergents
Concentrated
-
Concrete
Pre-Cast Concrete
Limestone
Mineral Surface with Grout Haze, Mortal/Cement Residue
-
Pre-wet surface with water.
Apply product diluted or full strength.
Let sit 1-3 minutes.
Agitate with brush.
-
Coverage will vary depending on density, porosity, texture, solution, surface absorption, etc., 200-500 sq ft per gallon can be expected.
-
Indoors and Outdoors
Horizontal and Vertical
-
Quart Bottles
One Gallon Bottles
One-Gallon 4-Pack Case
This product is compliant with the following national, state, and district AIM VOC regulations, US environmental Protection Agency, California Air Resources Board SCM Districts, South Coast Air Quality Management Districts, Maricopa County AZ, and Northeast Ozone Transport Commission.
